ITO ES-130 Palm-sized Electric StimulatorITO ES-130 掌上型电刺激仪
Professional Electroacupuncture Equipment
ITO ES-130 Palm-Sized Electroacupuncture Stimulator
A compact, professional-grade three-channel electroacupuncture stimulator from ITO Co. Ltd, Japan, designed for licensed practitioners requiring precision, portability, and clinical reliability in a single pocket-sized unit.
The ITO ES-130 is a palm-sized electroacupuncture stimulator built for professional clinical use. Manufactured by ITO Co. Ltd, a Japanese company with over 100 years of expertise in electrophysical therapy, the ES-130 delivers stimulation across three semi-independent output channels, supporting up to six needle sites simultaneously. Its frequency range spans 1 to 500 Hz across three selectable bands, covering the full spectrum commonly used in professional electroacupuncture practice.
The device uses a biphasic rectangular waveform with a phase duration of 100 microseconds, an engineering choice designed to minimise electrolysis at the needle tip during treatment. A Low/High selector switch adjusts the output mode between acupuncture needle use and MEA electrotherapy, while each channel carries its own independent intensity control. Frequency selection is guided by a flashing indicator light, giving the practitioner clear visual feedback without interrupting the treatment process.
Weighing just 120g and requiring only a standard 9V battery, the ES-130 is equally suited to a fixed clinic environment and mobile practice. Each unit is supplied with three sets of CE wire leads, a carrying case, and an instruction manual. It is certified to IEC 60601-1 Type BF safety standards and intended for use by licensed acupuncture and TCM practitioners.
Over a century of Japanese electrotherapy engineering in a 120g clinical instrument: the ITO ES-130 delivers three independent channels of professional electroacupuncture stimulation wherever practice demands it.
Supplied with three sets of CE wire leads, a carrying case, and an instruction manual, the ES-130 is ready for immediate clinical use. A 9V battery is required and not included. The unit is intended for use by licensed acupuncture and TCM practitioners and is certified to IEC 60601-1 Type BF safety standards.
Expiry Date: 30/09/2031
Description
Professional Electroacupuncture Equipment
ITO ES-130: Precision Electroacupuncture in a Palm-Sized Format
The ITO ES-130 is a professional-grade electroacupuncture stimulator designed for clinical use by licensed practitioners. Compact enough to fit in the palm of the hand yet capable of driving three independent output channels simultaneously, it brings the precision and reliability expected of ITO Co. Ltd into a portable, practice-ready format suited to both clinic and mobile treatment settings.
Three Channels. Six Sites. One Pocket-Sized Professional Unit.
The ES-130 supports up to six needle sites simultaneously across three semi-independent channels, each with its own intensity control. With a frequency range spanning 1 to 500 Hz across three selectable bands and a biphasic rectangular waveform specifically designed to minimise electrolysis damage to needles, it is built around the practical and technical demands of professional electroacupuncture practice.
Instructions for Use
Before use, ensure all output dials are set to the locked OFF position. Attach the electrode clips securely to the needles, select the appropriate intensity and frequency settings, then gradually adjust the output level as required by the practitioner.
- Set all output dials to OFF before connecting electrodes.
- Attach clips securely to the needles before starting stimulation.
- Up to six sites may be treated at one time, with two sites per channel.
- Select the appropriate Low, Medium, or High frequency range before treatment.
- The frequency indicator light will flash according to the selected frequency.
- Treatment time should be limited to within 30 minutes.
- Monitor the patient and device throughout use.
- Stop immediately if any discomfort, abnormality, or unusual reaction occurs.
- After treatment, return all output dials to the locked OFF position before removing cables and needles.
- Use only a 9V 6F22 battery.
Please read the full manufacturer’s instructions before operating the device.
Manufacturer and Heritage
Over a Century of Electrotherapy Expertise from ITO Co. Ltd
ITO Co. Ltd is a Japanese manufacturer with over 100 years of history in electrophysical therapy devices, and one of the most respected names in professional acupuncture and electrotherapy equipment worldwide. The ES-130 reflects this heritage: a rigorously engineered instrument built to the IEC 60601-1 Type BF safety standard, designed for the specific requirements of licensed acupuncture and TCM practitioners, and trusted in clinical settings across the globe.
Technical Specification
Broad Frequency Range with a Needle-Safe Biphasic Waveform
The ES-130 delivers stimulation across 18 programmed frequencies spanning 1 to 500 Hz, organised into three selectable ranges: Low (1 to 20 Hz), Medium (20 to 150 Hz), and High (150 to 500 Hz). Its biphasic rectangular waveform, with a phase duration of 100 microseconds, is specifically engineered to reduce electrolysis at the needle tip during prolonged use. A Low/High selector switch adjusts output mode between acupuncture needle use and MEA electrotherapy, giving practitioners precise control over their treatment parameters.
Clinical Positioning
Portable, Reliable, and Built for Professional Practice
Weighing just 120g and measuring 96mm in height, the ES-130 is one of the most compact professional electroacupuncture units available. Powered by a standard 9V battery, it requires no mains connection and is equally at home in a fixed clinic setting or carried to mobile appointments. Each unit includes three sets of CE wire leads, a carrying case, and an instruction manual, making it a complete and immediately deployable clinical instrument.
Additional information
| Weight | 0.25 kg |
|---|